巴斯夫POM-N2320-0038 一级经销商

POM 德国巴斯夫Ultraform? N2320-0038 物性介绍：快速固化标准注塑级， 含脱模剂。

Ultraform? N2320 0038 | BASF | POM
Product Information

Rapidly solidifying standard grade for injection molding. Abbreviated designation according to ISO 1043: POMDesignation according to ISO 9988-1: POM-K, M-GNR, 03-002

Rheological properties	Value	Unit	Test Standard
Melt volume-flow rate
7.5	cm3/10min	ISO 1133
Temperature
190	°C	ISO 1133
Load
2.16	kg	ISO 1133
Molding shrinkage (parallel)
2.1	%	ISO 294-4, 2577
Molding shrinkage (normal)
2.1	%	ISO 294-4, 2577
Mechanical properties	Value	Unit	Test Standard
Tensile Modulus
2500	MPa	ISO 527-1/-2
Yield stress
63	MPa	ISO 527-1/-2
Yield strain
12.5	%	ISO 527-1/-2
Nominal strain at break
33	%	ISO 527-1/-2
Tensile creep modulus (1000h)
1300	MPa	ISO 899-1
Charpy impact strength (+23°C)
260	kJ/m2	ISO 179/1eU
Charpy impact strength (-30°C)
190	kJ/m2	ISO 179/1eU
Charpy notched impact strength (+23°C)
6.5	kJ/m2	ISO 179/1eA
Charpy notched impact strength (-30°C)
5.5	kJ/m2	ISO 179/1eA